Belden Wire 8-3 W- #10 Ground 62 Feet THHW 600 VOLT Direct Burial Tray Cable NOS

  

Belden Wire 8-3 with #10 Ground 62 Feet THHW 600 VOLT Direct Burial Tray Cable. 3 conductors are #8 black with numbering 1,2-3 ground wire is # 10 stranded bare copper. Belden Cable Wire Tray Cable is new old stock in. Wire ends were always sealed and stored indoors.

One end still has factory sealed boot. Actual measurement is 62 feet without the foot that's exposed in picture for listing. Please review all pictures and if us know if you have any questions.

If you do have a minute, we have many other related items so please take a look. This 8 AWG 3 conductor tray cable with # 10 ground is a 600 volt non shielded cable designed for power, control and lighting circuits where the benefits of cross-lined polyethylene and its flame retarding properties are needed.

It is suitable for a broad range of commercial and industrial uses. This cable is referred to as both XLPE and XPTC.

Applications: In free air, raceways, and direct burial In wet or dry locations Approved for direct burial Class 1, Division 2 industrial hazardous locations per NEC Standards: UL Type XHHW-2, VW-1 conductors IEEE 1202/CSA FT4 Meets cold bend test of -25C per UL 1277 Section 15 Rated for UV/sunlight resistance UL 1277 Type TC-ER for 3 or more conductors Construction: Conductor: Fully annealed stranded bare copper per ASTM B3 Class B stranding per ASTM B8 ICEA color code Method 4: 3 black #8 conductors numbered. Ground: Stranded bare #10 AWG copper per UL 1277 Insulation: Crossed-linked Polyethylene (XLPE) XHHW-2 per UL 44 Jacket: Lead-free, flame-retardant, sunlight-resistant Polyvinyl Chloride (PVC) per UL standard 1277.